Advanced Wind Solar Hybrid charge controller

Multistage charging technology Multiple protect functions PWM control

 Product features

1. current limite/ voltage limite functionA)current limiterThe controller which controls the wind turbine and the solar cells to limit battery charge voltage and current with PWM method. It means that when battery power is low, current will be limited. That is, when wind turbin and solar charge current is less than the total limit point, the wind turbine and all the solar will charge the battery when wind turbin and solar charge current is higher than the total limit point, charge battery with limited current, the redundant energy will be dumploaded by PWM mode.B) voltage limiting voltage limiting: Limited voltage Charge when the battery power is high.2. Control wind turbineExact speed controller for wind turbine, when wind turbine exceeds a certain speed, this device will stop the wind turbine, and auto self recover a sec. later.3. LCD Display: Voltage: Battery vol. , wind turbine vol., solar cell panel vol.Power: wind power, solar cell powerCurrent: wind turbine current, solar cell current, battery charge current and power situation.Output: Routine Through the four buttons on the LCD, you can view the display and set parameters.4. Output function:There are 2 DC output designed for this device , each routine has 9 output control ways. a)Normally on; b)Normally off; c)Normally half-power; d)timed half-power; e)Light control on and off; f)light control on and timed off. Light; g)controller on, Normally half-power, Light contorl off.; h)Light controller on, timed half power, light control off; i) light contol on, light half power

5. Protection function:It has a perfect protection features, including: Anti recoil solar cells, solar cells, anti-reverse, battery over charge, battery anti-reverse, mine, wind turbine current limiting, automatic braking and hand brake wind turbine.6. Communicating function:Our controller has data transmission function(RS232/485), and matched with Remote monitoring software. This software can monitor system running situation. Such as battery voltage, wind turbine voltage, solar cell voltage, battery charge current, wind turbine current, solar cell charge current, battery charge power, solar cell charge power, wind turbine charge power, speed of wind turbine and etc. The software can set and modify system parameters, meanwhile controller the load run situation and wind turbine.7. Low-voltage charge function: We add low-voltage charge controller module according to the demand of our customer and market. This module can charge battery while wind turbines at low speeds . (Optional function)8. Set-up function: 1) Charge voltage set: according to the different characteristics of wind turbine, the controller can designe start charge voltage of wind turbine through the communication port, only start to charge while he wind turbine voltage is higher than setted point, battery will be charged.2) Dumpload voltage point of wind turbine; user can set up a certain dumpload point by pressing buttoms Depending on different wind turbine characteristics3) Battery voltage protect point: could be set up according to different characteristics of battery and customers’ demand. (Over-charge voltage/ over-discharge voltage/ recovery voltage)4) Set up light control on and off voltage point of solar cells.9. Ability to adapt to the environment:Components are industrial grade components to ensure equipment work under -30 °C degrees. The main controller chip are imported from the United States, the ability to adapt is from -40 °C to +85 °C military level. And uses ROHS material to match requirements of United States and Europe according to customer needs.

 Product tech-data

Model	IS06-12TA	IS06-24TA
Rated Battery Voltage	12V	24V
Rated Wind Power(Watts)	14VDC	28VDC
Rated Max Wind Power(Watts)	600W
Input Currency Range	0-40A
Wind Max Input Power(Watts)	800W
Start Dump Voltage(Factory number)	13V-15V(14.4V)adjustable	26V-30V(28.8V)adjustable
Start Dump Currency(Factory number)	0-20A(18A)adjustable
Over rotate speed(Factory number)	0-600 adjustable, recovery automatically 10 min after over rotated speed(500)
Rated Max Solar Power(Watts)	150W	300W
Solar open-circuit voltage	18V	36V
Max Solar Charge Current	15A
Battery over-discharge voltage	10V-12V adjustable(10.8V)	20V-24V adjustable(21V)
Battery over-discharge recovery voltage	11V-15V adjustable(13V)	22V-26V adjustable(25V)
Output Protect Voltage	16V	32V
temperature compensation	-5mv/°C/2V
Route 1 rated output currency	10A
Route 2 rated output currency	10A
Route 1 Output way of Control(Factory number)	9 Ways optional (light-operated switch)
Route 2 Output way of Control (Factory number)	9 Ways optional (light-operated on, 5 hours time control off)
Display	LCD
show contents	Battery Voltage, Wind voltage,Solar voltage,  Wind Currency,Solar Currency,Wind Power, Solar Power, and over-charge voltage, over-discharge, overload,short circuit,Night and etc.
communication interface	RS232C(RS485 optional)
working atmosphere	-20--+55°C / 35-85%RH(Condensation-free)

Advanced Wind Solar Hybrid charge controller